I went to the Zoning Board of Appeals Meeting on May 6th and presented my case. Surprisingly, there were only a few questions and very little discussion. I think that a lot of the reason for that was because of the letters I had written. In addition to the fact that I had already met with the DPW Commissioner and the Conservation Board and gotten the thumbs up from them. Two of my neighbors came and spoke in favor of my plan. Most importantly, a representative from the Conservation Board presented.She was very enthusiastic and explained that MORE people should be putting in stone driveways and that I was a GOOD example.
The were a few stipulations though. I must install a concrete apron at the base of the driveway, the size of which must be worked out with the DPW. They are also requiring the use of geotextile fabric under the driveway to keep the stone from sinking into the ground and then four inches of large stone on top of that. On the very top I’ll need to lay about an inch and a half of washed, crushed stone. and then add the pavers to the edge.
I spent some time pricing this out and here is the basic budget.
$225.00 – 103 f t of US-220 Geotextile Fabric
$ 40.00 – Shipping of Geotextile
$ 124.00 – Skidster rental
$ 138.00 – Dump Trailer rental
$ 60.00 – Three loads of debris to town dump
$371.00 – 11 cubic yards of #2 stone (large)
$233.55- 5 cubic yards of #1A stone (small)
$232.00 – 400 3.5×7 tumbled pavers
$ 92.00 – 23 bags of Quickcrete (for apron)
__________________________________
$1,515.55
The lowest quote I found for an asphalt driveway was $2,600 so this is a savings of $1,084.45
I am going to call to see if I can hire out the removal of the driveway. The cost of doing it myself is $322.00 If I can come close to that I’ll hire it out because that’s much safer than me running heavy machinery I have no idea how to run. I could also break it up by hand over the course of a few days and then only rent the dump trailer one day to remove it (If I’m a real penny pincher). I’m also going to get quotes to see what it will cost me to just hire someone to do the who shebang. Just to see if doing it myself is really a savings of a significant measure. I also need to compare the price of the Quickcrete to that of getting a truck and I also want to see if I can get the geotextile fabric localy and less expensively.
I think that I will carry out the project in two phases to break up the costs even further. Phase One ($958) will the removal of the old driveway. Then I’ll add the fabric and large stone. Phase Two ($556)will the addition of the concrete apron, pavers and small stone.
Eventually, I’ll replace the walk to the front porch with the same pavers and replace the garden edging (the old concrete from the sidewalk) with stacked flagstone. Then, I’m sticking a fork in the yard.
Ittybittybungalow 
Good for you. Congratulations!
Thanks!
Congratulations! Looking forward to seeing the end result.
Thanks! Also thanks for the Depave link!
I’m finding geotextile fabric on the web, but not US-220 Geotextile Fabric. Does that reduce the permeability of the driveway?
Good question Trudy.The geotextile fabric should allow all water to pass through it.
Hooray! Glad you get to put in the crushed stone driveway. I have the same question as Trudy–how does the geotextile fabric affect the permeability?
Hi Jayne,
The geotextile fabric should not affect the permerability of the driveway. It is designe to allow the water to pass through but keep the stone from sinking into the soil over time.
This is great news! You will be a trend-setter!!!
Can’t wait to see the project unfold 🙂